Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2000SEPHIA LS SEDAN L4-1.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
2000 Kia Sephia LS Sedan L4-1.8L
Engine Mount
2000 Kia Sephia LS Sedan L4-1.8LSECTION Engine Mount
No.1 Engine Mount Bolts 49.2 - 69 ft. lbs. (67 - 93.2 Nm)
No.3 Engine Mount Bolt 62.9 - 86 ft. lbs. (85.3 - 116.6 Nm)
No.2 Engine Mount Nuts 28 - 38 ft. lbs. (38 - 51 Nm)
No.4 Engine Mount:
Nuts 49 - 68 ft. lbs. (68 - 93 Nm)
Bolt 47 - 66 ft. lbs. (64 - 89 Nm)
Joint Shaft Support Bracket:
Bolts 32 - 46 ft. lbs. (43 - 62 Nm)
No.3 Engine Mount Bolt 62.9 - 86 ft. lbs. (85.3 - 116.6 Nm)
No.2 Engine Mount Nuts 28 - 38 ft. lbs. (38 - 51 Nm)
No.4 Engine Mount:
Nuts 49 - 68 ft. lbs. (68 - 93 Nm)
Bolt 47 - 66 ft. lbs. (64 - 89 Nm)
Joint Shaft Support Bracket:
Bolts 32 - 46 ft. lbs. (43 - 62 Nm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.