Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Passenger Power Window Switch
Turn ignition off. Disconnect passenger power window switch harness connector. Using an ohmmeter, check for continuity between specified switch terminals while operating switch. See PASSENGER POWER WINDOW SWITCH CONTINUITY . SeeFig 1 . Replace passenger power window switch if continuity is not as specified.
| Switch Position | Continuity Between Terminal No. |
|---|---|
| UP | 1 & 2; 5 & 6 |
| OFF | 2 & 4; 5 & 6 |
| DOWN | 1 & 5; 2 & 4 |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.