Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Long Term Evolution 2 (LTE2) Antenna
| Refer to COMPONENT INDEX . |
The second cellular telephone antenna is the LTE2 antenna (1) and is used for sending and receiving cellular telephone signals and data. The signals and data are supplied to the radio and telematics modules.
The LTE2 antenna is mounted in the instrument panel, behind the radio or Display Screen Module (DSM), as equipped. The use of two LTE antennas is for the purpose of increasing data upload and download speeds.
The LTE2 antenna has an internal 10 kilohm resistor to set a Diagnostic Trouble Code (DTC) in the module to which it is connected if the antenna cable or LTE2 antenna is disconnected from that module.
The LTE2 antenna cannot be repaired. If the LTE2 antenna is ineffective or damaged, it must be replaced. Refer to ANTENNA, LONG-TERM EVOLUTION 2 (LTE2), REMOVAL AND INSTALLATION .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.