Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2024GRAND CHEROKEE L LIMITED, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 11 (5.7L - DTCS P0205 TO P025C)DTC TROUBLESHOOTINGP0205-00-FUEL INJECTOR 5 CIRCUIT OPENTECHNICAL DATA-FUEL INJECTORS
2024 Jeep Grand Cherokee L Limited, RWD
Technical Data-Fuel Injectors
2024 Jeep Grand Cherokee L Limited, RWDSECTION Technical Data-Fuel Injectors
WARNING: This page is about a different variant/trim than selected.
The specifications listed below are for typical Fuel Injectors used on low pressure fuel systems:
| FUEL INJECTOR TECHNICAL SPECIFICATIONS | |
|---|---|
| Fuel Injector resistance | Typically between 9.0 and 18.0 Ohms. The resistance in a winding will vary with temperature. When checking a Fuel Injector coil it is good practice to compare the resistance of the suspect injector with the other known good injectors. Typically, the difference should be less than 10% between the injectors. |
| Fuel Injector current draw | Peak amperage draw will typically be around 1.0 amp when energized |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.