Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2024GLADIATOR NIGHTHAWK, PART TIME T/CASE CONTROL, AUTOMATIC TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEM3.6L (GPEC 2A) - DTCS P0222 TO P0302
2024 Jeep Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans
3.6L (GPEC 2A) - DTCS P0222 To P0302
2024 Jeep Gladiator Nighthawk, Part Time T/Case Control, Automatic TransSECTION 3.6L (GPEC 2A) - DTCS P0222 To P0302
- DTC Troubleshooting
- P0222-Throttle Position Sensor 2 Circuit Low
- P0223-Throttle Position Sensor 2 Circuit High
- P025A-Fuel Pump Module Control Circuit Open
- Known Issues - FPCM System
- FPCM System Operation
- Functional Description- Fuel Pump Control Module (FPCM) And Fuel Pump
- Functional Description - Powertrain Control Module (Pcm)
- Technical Data-Fuel System Pressure Specifications
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Pump Control Module
- Preliminary Diagnostic Checks
- Check For An Active Or Intermittent Condition
- Diagnostic Test - FPCM System Command Circuit Faults (P025A, P027A)
- Diagnostic Test - Complete Fuel Pump Control Module System Testing (Not DTC Specific)
- Powertrain Verification Test
- P025B-Fuel Pump Module Control Circuit Performance
- Known Issues - FPCM System
- FPCM System Operation
- Functional Description- Fuel Pump Control Module (FPCM) And Fuel Pump
- Functional Description - Powertrain Control Module (Pcm)
- Technical Data-Fuel System Pressure Specifications
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Pump Control Module
- Preliminary Diagnostic Checks
- Check For An Active Or Intermittent Condition
- Diagnostic Test - Fuel Pump Control Performance Faults (P025B, P027B, P062A, P064A, P26EA)
- Powertrain Verification Test
- P025C-Fuel Pump Module Control Circuit Low
- Known Issues - FPCM System
- FPCM System Operation
- Functional Description- Fuel Pump Control Module (FPCM) And Fuel Pump
- Functional Description - Powertrain Control Module (Pcm)
- Technical Data-Fuel System Pressure Specifications
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Pump Control Module
- Preliminary Diagnostic Checks
- Check For An Active Or Intermittent Condition
- Diagnostic Test - FPCM System Voltage Low And High (P025C, P025D, P027C, P027D)
- Powertrain Verification Test
- P025D-Fuel Pump Module Control Circuit High
- Known Issues - FPCM System
- FPCM System Operation
- Functional Description- Fuel Pump Control Module (FPCM) And Fuel Pump
- Functional Description - Powertrain Control Module (Pcm)
- Technical Data-Fuel System Pressure Specifications
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Pump Control Module
- Preliminary Diagnostic Checks
- Check For An Active Or Intermittent Condition
- Diagnostic Test - FPCM System Voltage Low And High (P025C, P025D, P027C, P027D)
- Powertrain Verification Test
- P0298-Engine Oil Temperature Too High
- P0300-Multiple Cylinder Misfire
- P0301-Cylinder 1 Misfire
- P0302-Cylinder 2 Misfire
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.