Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2024GLADIATOR NIGHTHAWK, PART TIME T/CASE CONTROL, AUTOMATIC TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMS(DIGITAL TV MODULE - ELECTRICAL DIAGNOSTICS)DIAGNOSTIC CODE INDEX
2024 Jeep Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans
Diagnostic Code Index
2024 Jeep Gladiator Nighthawk, Part Time T/Case Control, Automatic TransSECTION Diagnostic Code Index
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B1499-11 | TV ANTENNA 1 - CIRCUIT SHORT TO GROUND |
| B1499-12 | TV ANTENNA 1 - CIRCUIT SHORT TO BATTERY |
| B1499-13 | TV ANTENNA 1 - CIRCUIT OPEN |
| B149B-11 | TV ANTENNA 2 - CIRCUIT SHORT TO GROUND |
| B149B-12 | TV ANTENNA 2 - CIRCUIT SHORT TO BATTERY |
| B149B-13 | TV ANTENNA 2 - CIRCUIT OPEN |
| B1550-4B | DIGITAL TELEVISION MODULE - OVER TEMPERATURE |
| B2199-16 | BATTERY VOLTAGE - CIRCUIT VOLTAGE BELOW THRESHOLD |
| B2199-17 | BATTERY VOLTAGE - CIRCUIT VOLTAGE ABOVE THRESHOLD |
| B21DD-84 | SYSTEM VOLTAGE - SIGNAL BELOW ALLOWABLE RANGE |
| B21DD-85 | SYSTEM VOLTAGE - SIGNAL ABOVE ALLOWABLE RANGE |
| B2206-00 | CURRENT VIN MISSING / MISMATCH |
| B222C-00 | VEHICLE CONFIGURATION NOT PROGRAMMED |
| B22A9-00 | ECU INTERNAL PERFORMANCE |
| B23C4-12 | SIDE CAMERA - CIRCUIT SHORT TO BATTERY |
| B23C4-14 | SIDE CAMERA - CIRCUIT SHORT TO GROUND OR OPEN |
| B23C5-12 | FRONT CAMERA - CIRCUIT SHORT TO BATTERY |
| B23C5-14 | FRONT CAMERA - CIRCUIT SHORT TO GROUND OR OPEN |
| U0010-00 | CAN INTERIOR BUS |
| U0011-00 | CAN INTERIOR BUS OFF PERFORMANCE |
| U0140-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0184-00 | LOST COMMUNICATION WITH RADIO |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.