Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
A/C System Specifications
2023 Jeep Wagoneer Carbide, RWDSECTION A/C System Specifications
| ITEM | DESCRIPTION | NOTES |
|---|---|---|
| A/C Clutch Air Gap | 0.35 - 0.60 mm (0.014 - 0.024 in.) | |
| A/C Clutch Coil Draw | 3.2 Amps | @ 12V ± 0.5V @ 20° C (68° F) |
| A/C Clutch Coil Resistance | 5.1 ± 0.2 Ohms | @ 20° C (68° F) when measured across coil lead connector |
| Freeze-Up Control | Evaporator Temperature Sensor | HVAC housing mounted |
| High PSI Control | A/C Pressure Transducer | A/C discharge line mounted |
| Refrigerant Charge Capacity | Refer to A/C REFRIGERANT SYSTEM, CAPACITIES AND RECOMMENDED FLUIDS, SPECIFICATIONS . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.