Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
When Monitored
2023 Jeep Wagoneer Carbide, RWDSECTION When Monitored
This diagnostic runs one time during an ignition cycle when the following conditions are met:
- During a cold start condition.
- When the difference between ambient temperature and engine coolant temperature is less than 10.0°C (18.0°F).
- The first 20 seconds of engine run time.
- The PCM checks the split injection for all four Fuel Injectors during a cold start. First pulse is 5% and second pulse is 95%.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.