Brake Specifications

2023 Jeep Wagoneer Carbide, RWDSECTION Brake Specifications

BASE BRAKE SYSTEMΒ 

SPECIFICATIONS

DESCRIPTION SPECIFICATION
Front Disc Brake Caliper Type Dual Piston Sliding
Rear Disc Brake Caliper Type Single Piston Sliding With Electric Parking Brake (EPB) Actuator
Front Disc Brake Caliper 2 x 54 mm (2. 12 in.)
Front Disc Brake Rotor 336 X 30.4 mm (13. 2 X 1. 20 in.)
Front/Rear Disc Brake Rotor Max. Runout 0.020 mm (0.0008 in.)
Front/Rear Disc Brake Rotor Max. Thickness Variation 0.015 mm (0.00059 in.)
Front Rotor Minimum Thickness 28.4 mm (1. 118 in.)
Rear Rotor Minimum Thickness 20.4 mm (0.858 in.)
Rear Disc Brake Caliper 1 x 54 mm (2. 12 in.)
Rear Disc Brake Rotor 350 x 22 mm (13. 77 X 0.87 in.)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.