Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Body Control Module (BCM)
| Refer to COMPONENT INDEX . |
The BCM performs the gateway function from the CAN-FD2 to the LIN, the LIN to the CAN-FD2, the CAN-FD2 to CAN-FD3, the CAN-FD3 to the CAN-FD2 and the CAN-IHS to CAN-FD2.
BCM - If there is a loss of communication between the PAM and the BCM, the BCM will set LED control signal to "SNA".
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.