Quick Lookups: Fluids

2023 Jeep Grand Cherokee Laredo X, AWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 3.6L Eng 4.00 OZS. 0.11 L FD46XG S
Air Cond Refrigerant 3.6L Eng Long Wheelbase 1.63 LBS. 0.73 KG R-1234yf S
Air Cond Refrigerant 3.6L Eng Short Wheelbase 1.38 LBS. 0.62 KG R-1234yf S
Automatic Transmission Fluid 3.6L Eng 9.50 QTS. 8.99 L MOPAR ZF 8&9 Speed Automatic Transmission Fluid, or equivalent Dry fill capacity, depending on the type and size of the internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler may vary. Failure to use the correct fluid may affect the function or performance of the transmission. S
Brake Fluid N/A N/A MORAR Brake Fluid DOT 3, SAE J1703 If MOPAR Brake Fluid DOT 3 is not available, then MOPAR Brake and Clutch Fluid DOT 4 (P/N04549625AC), is acceptable. S
Differential Gear Oil Front Axle,195FIA 0.60 QTS. 0.56 L MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 S
Differential Gear Oil Rear Axle,195RIA (Aluminum) 1.00 QTS. 0.94 L MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 S
Differential Gear Oil Rear Axle,230RIA w/ELSD (Aluminum) 1.40 QTS. 1.32 L MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 with friction modifier additive S
Differential Gear Oil Rear Axle,230RIA w/o ELSD (Aluminum) 1.20 QTS. 1.13 L MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 S
Engine Coolant 3.6L Eng w/o Trailer Towing Package 11.00 QTS. 10.4 L MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 Includes: heater and coolant recovery tank filled to "max" level. S
Engine Coolant 3.6L Eng w/Trailer Towing Package 11.50 QTS. 10.88 L MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 Includes: heater and coolant recovery tank filled to "max" level. S
Engine Oil 3.6L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 0W-20 Full Synthetic Engine Oil Meeting the requirements of the manufacturer Material Standard MS-6395. S
Fuel Tank 23.00 GALS. 87.06 L S
Transfer Case Fluid T/Case Mfr CD MP3015C 0.84 QTS. 0.79 L MOPAR Automatic Transmission Fluid Plus 4 or equivalent licensed ATF+4 product Approximate dry fill or fill to bottom edge of fill plug hole. S
Windshield Washer Fluid N/A N/A Windshield Washer Solvent only Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.