Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2023GLADIATOR MOJAVE, PART TIME T/CASE CONTROL, AUTOMATIC TRANSREPAIR AND DIAGNOSISSTEERINGSTEERING LINKAGESTEERING SYSTEMCOLUMNTECHNICAL SPECIFICATIONSTORQUE SPECIFICATIONS - STEERING COLUMN
2023 Jeep Gladiator Mojave, Part Time T/Case Control, Automatic Trans
Torque Specifications - Steering Column
2023 Jeep Gladiator Mojave, Part Time T/Case Control, Automatic TransSECTION Torque Specifications - Steering Column
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENT |
|---|---|---|---|
| 1 | Steering Wheel Nut | 50 N. m (37 Ft. Lbs.) | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| 2 | Steering Column Nuts | 27 N. m (20 Ft. Lbs.) | - |
| 3 | Bulkhead Bearing Bolt | 9 N. m (7 Ft. Lbs.) | - |
| 4 | Intermediate Shaft Coupler Upper Pinch Bolts | 34 N. m (25 Ft. Lbs.) | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| 5 | Intermediate Shaft Coupler Lower Pinch Bolts | 55 N. m (41 Ft. Lbs.) | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENT |
|---|---|---|---|
| 1 | Electronic Steering Lock (ESL) Module Bolts | 8 N. m (71 In. Lbs.) | - |
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENT |
|---|---|---|---|
| 1 | Steering Column Control Module (SCCM) Band Clamp Fastener | 6 N. m (53 In. Lbs.) | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.