Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Description And Operation
DESCRIPTION
| 1 - CVPM |
The Central Vision Processing Module (CVPM) generates the view in the Front View Camera (FVC) and the Rear View Camera (RVC) system displays according to inputs received from the two external cameras and driver touch screen inputs via a Low Voltage Differential Signal (LVDS) coaxial cable. The CVPM combines the video feeds together and outputs it to the display screen.
The wiring harness connector to the CVPM includes the power and the video feed connections. The CVPM video feed connections are as follows:
- Light Green - Front Camera.
- Orange - Rear Camera.
- Violet - to the Radio.
The CVPM is located on the rear cabin wall.
OPERATION
For additional information on the Front and Rear View Camera system functionality and the CVPMs role in the operation of this system. Refer to DESCRIPTION AND OPERATION .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.