Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Customer Programming Sequence
2023 Jeep Compass RedSECTION Customer Programming Sequence
NOTE:
The following sequence of events must occur within 60 seconds of the ignition being placed in the ON position in order for the programming to be completed successfully.
Perform the following procedure to modify the BELTMINDER feature:
- With all doors closed and the ignition in any position except ON or START, buckle the driver side front seat belt.
- Cycle the ignition to the ON position and wait for the seatbelt indicator reminder function to conclude (about six seconds).
- Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.
- Cycle the ignition to any position except ON or START to toggle the BELTMINDER feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.