Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2023COMPASS HIGH ALTITUDEREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY CONTROL MODULE (BCM) - DTCS B106A-12 TO B165C-19
2023 Jeep Compass High Altitude
Body Control Module (BCM) - DTCS B106A-12 To B165C-19
2023 Jeep Compass High AltitudeSECTION Body Control Module (BCM) - DTCS B106A-12 To B165C-19
- DTC Troubleshooting
- B106A-12-Rear Defrost-EBL Control Circuit-Circuit Short To Battery
- B11C0-15-Front Heated Seats Power Supply-Circuit Short To Battery Or Open
- B11C0-19-Front Heated Seats Power Supply-OVERCURRENT
- B1606-15-Headlamp Switch Input-Circuit Short To Battery Or Open
- B1609-11-Panel Dimmer Input-Circuit Short To Ground
- B1609-15-Panel Dimmer Input-Circuit Short To Battery Or Open
- B161A-19-Courtesy-Dome Lamp Control-OVERCURRENT
- B1626-19-Cargo Lamp Control-OVERCURRENT
- B162A-00-Left Low Beam Control
- B162A-15-Left Low Beam Control-Circuit Short To Battery Or Open-Halogen Lamps
- B162A-15-Left Low Beam Control-Circuit Short To Battery Or Open-Hid Lamps
- B162A-19-Left Low Beam Control-OVERCURRENT-Halogen Lamps
- B162A-19-Left Low Beam Control-OVERCURRENT-Hid Lamps
- B162E-00-Right Low Beam Control
- B162E-15-Right Low Beam Control-Circuit Short To Battery Or Open-Halogen Lamps
- B162E-15-Right Low Beam Control-Circuit Short To Battery Or Open-Hid Lamps
- B162E-19-Right Low Beam Control-OVERCURRENT-Halogen Lamps
- B162E-19-Right Low Beam Control-OVERCURRENT-Hid Lamps
- B1632-00-Left High Beam Control
- B1632-15-Left High Beam Control-Circuit Short To Battery Or Open-Halogen Lamps
- B1632-15-Left High Beam Control-Circuit Short To Battery Or Open-Hid Lamps
- B1632-19-Left High Beam Control-OVERCURRENT-Halogen Lamps
- B1632-19-Left High Beam Control-OVERCURRENT-Hid Lamps
- B1636-00-Right High Beam Control
- B1636-15-Right High Beam Control-Circuit Short To Battery Or Open-Halogen Lamps
- B1636-15-Right High Beam Control-Circuit Short To Battery Or Open-Hid Lamps
- B1636-19-Right High Beam Control-OVERCURRENT-Halogen Lamps
- B1636-19-Right High Beam Control-OVERCURRENT-Hid Lamps
- B163A-00-Front Left Turn Lamp 1 Control
- B163A-15-Front Left Turn Lamp Control-Circuit Short To Battery Or Open
- B163A-18-Front Left Turn Lamp Control-Under Current
- B163A-19-Front Left Turn Lamp Control-OVERCURRENT
- B163E-00-Front Right Turn Lamp 1 Control
- B163E-15-Front Right Turn Lamp Control-Circuit Short To Battery Or Open
- B163E-18-Front Right Turn Lamp Control-Under Current
- B163E-19-Front Right Turn Lamp Control-OVERCURRENT
- B1642-15-Rear Left Turn Lamp Control-Circuit Short To Battery Or Open
- B1642-18-Rear Left Turn Lamp Control-Under Current
- B1642-19-Rear Left Turn Lamp Control-OVERCURRENT
- B1646-15-Rear Right Turn Lamp Control-Circuit Short To Battery Or Open
- B1646-18-Rear Right Turn Lamp Control-Under Current
- B1646-19-Rear Right Turn Lamp Control-OVERCURRENT
- B165C-15-Right Signature Lamp Control-Circuit Short To Battery Or Open
- B165C-19-Right Signature Lamp Control-OVERCURRENT
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.