Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISSTEERINGSTEERING LINKAGESTEERING SYSTEMPUMPINSTALLATION5.7L
2014 Jeep Grand Cherokee Laredo, AWD
Steering System: Pump: Installation: 5.7L
2014 Jeep Grand Cherokee Laredo, AWDSECTION 5.7L
- Position the power steering pump (1) and using the holes in the pulley for access, install 3 pump mounting bolts (5) and tighten to 23 N.m (17 ft. lbs.).
- Install the pressure line (4) on the pump (1) and tighten the nut to 28 N.m (21 ft. lbs.).
- Install the supply hose (3) on the pump (1).
- Install the drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
- Install the air cleaner body, refer to AIR INTAKE SYSTEM .
- Fill and bleed the system with power steering fluid. Refer to STANDARD PROCEDURE .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.