Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISMAINTENANCEPROCEDURESVEHICLE QUICK REFERENCETOWINGSTANDARD PROCEDURESTANDARD PROCEDURE - TOWING, VEHICLERECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)SHIFTING OUT OF NEUTRAL (N)
2014 Jeep Grand Cherokee Laredo, AWD
Shifting Out Of Neutral (N)
2014 Jeep Grand Cherokee Laredo, AWDSECTION Shifting Out Of Neutral (N)
Use the following procedure to prepare the vehicle for normal usage.
- Turn the ignition key to the unlocked OFF position.
- Shift transmission into N (Neutral).
- Shift transfer case lever to desired position. Refer to STANDARD PROCEDURE .
- Shift transmission into P (Park).
- Start the engine.
- Shift transmission into D (Drive).
NOTE:
When shifting out of transfer case N (Neutral), turning the engine OFF may be required to avoid gear clash.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.