Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 25 (5.7L - DTCS P0630 TO P2128)DIAGNOSIS AND TESTINGP0632-ODOMETER NOT PROGRAMMED IN PCMDIAGNOSTIC TEST
2014 Jeep Grand Cherokee Laredo, AWD
Diagnostic Test
2014 Jeep Grand Cherokee Laredo, AWDSECTION Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
PROGRAMMING MILEAGE INTO THE PCM
- Ignition on, engine not running.
- With the scan tool, erase DTCs.
- Using a scan tool, program the mileage into the PCM.
- Start the engine.
- Allow the engine to reach normal operating temperature.
- With the scan tool, select View DTCs.
Does the DTC reset?
Yes
- Replace and program the Powertrain Control Module in accordance with the Service Information. Refer to MODULE, POWERTRAIN CONTROL, REMOVAL .
- Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
No
- The mileage has been successfully programmed into the PCM. Test is complete.
- Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.