SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (5.7L ENGINE (SERVICE INFORMATION))SPECIFICATIONSENGINE SPECIFICATIONSPISTON RINGS
2014 Jeep Grand Cherokee Laredo, AWD

Piston Rings

2014 Jeep Grand Cherokee Laredo, AWDSECTION Piston Rings
WARNING: This page is about a different variant/trim than selected.
DESCRIPTION SPECIFICATION
Metric Standard
Ring Gap
Top Compression Ring 0.40 - 0.55 mm 0.015 - 0.021 in.
Second Compression Ring 0.24 - 0.51 mm 0.009 - 0.020 in.
Oil Control Rails 0.15 - 0.66 mm 0.0059 - 0.0259 in.
Side Clearance
Top Compression Ring 0.04 - 0.09 mm 0.001 - 0.0035 in.
Second Compression Ring 0.04 -.08 mm 0.001 - 0.0031 in.
Oil Control Rails 0.06 - 0.21 mm 0.002 - 0.008 in.
Ring Width
Top Compression Ring 1.17 - 1.19 mm 0.0460 - 0.0468 in.
Second Compression Ring 1.17 - 1.19 mm 0.0460 - 0.0468 in.
Oil Control Rails 0.387 - 0.413 mm 0.015 - 0.016 in.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.