Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (5.7L ENGINE (SERVICE INFORMATION))SPECIFICATIONSENGINE SPECIFICATIONSCAMSHAFT
2014 Jeep Grand Cherokee Laredo, AWD
Engine Specifications: Camshaft
2014 Jeep Grand Cherokee Laredo, AWDSECTION Camshaft
WARNING: This page is about a different variant/trim than selected.
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Metric | Standard | |
| Bearing Journal Diameter | ||
| No. 1 | 58.2 mm | 2.29 in. |
| No. 2 | 57.8 mm | 2.28 in. |
| No. 3 | 57.4 mm | 2.26 in. |
| No. 4 | 57.0 mm | 2.24 in. |
| No. 5 | 43.633 mm | 1.72 in. |
| Bearing To Journal Clearance Standard | ||
| No. 1 | 0.040 - 0.080 mm | .0015 -.003 in. |
| No. 2 | 0.050 -0.090 mm | 0.0019 -.0035 in. |
| No. 3 | 0.040 - 0.080 mm | .0015 -.003 in. |
| No. 4 | 0.050 - 0.090 mm | 0.0019 -.0035 in. |
| No. 5 | 0.040 - 0.080 mm | .0015 -.003 in. |
| Camshaft End Play | .080 - 0.290 mm | 0.0031 - 0.0114 in. |
| Duration | 269.3° | |
| Valve Lift (@ zero lash) | ||
| Intake | 12.0 mm | 0.472 in. |
| Exhaust | 11.70 mm | 0.460 in. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.