Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEMFUEL INJECTION, GASINJECTOR(S), FUELREMOVAL5.7L/6.4L
2014 Jeep Grand Cherokee Laredo, AWD
Injector(S), Fuel: Removal: 5.7L/6.4L
2014 Jeep Grand Cherokee Laredo, AWDSECTION 5.7L/6.4L
| 1 - PLIERS |
| 2 - INJECTOR CLIP |
| 3 - FUEL INJECTOR - TYPICAL |
| 4 - FUEL RAIL - TYPICAL |
- Remove the fuel rail assembly Refer to RAIL, FUEL, REMOVAL .
- Using suitable pliers (1), remove the fuel injector retaining clip (2).
- Remove the fuel injector (3) from the fuel rail (4) using a side to side motion while pulling the injector out of the fuel rail assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.