Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEMFUEL DELIVERY, DIESELHEATER, FUELREMOVALREMOVAL
2014 Jeep Grand Cherokee Laredo, AWD
Heater, Fuel: Removal: Removal
2014 Jeep Grand Cherokee Laredo, AWDSECTION Removal
- Disconnect the negative battery cable.
- Remove the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION, REMOVAL .
- Remove the fuel filter/water separator assembly. Refer to SEPARATOR AND FILTER, FUEL AND WATER, REMOVAL .
- Remove bolts (1 and 3) and the fuel filter/water separator assembly bracket (2).
- Remove bolts (2), and the fuel heater/temperature sensor (1).
- Remove and discard O-ring seal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.