Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Remote Radio Switch With Paddle Shift
The remote radio switches are mounted to the back of the steering wheel. Each switch consists of a remote radio switch and a paddle shift switch.
The right switch (1) consists of the following functions:
- Upshift switch (paddle shift) (10)
- Volume "UP" (9)
- Mode (8)
- Volume "DOWN" (7)
The left switch (2) consists of the following functions:
- Downshift switch (paddle shift) (3)
- Seek "UP" (4)
- Preset (5)
- Seek "DOWN" (6)
For information on the operation of the remote radio and paddle shift switches, refer to SWITCH, REMOTE RADIO, OPERATION .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.