Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSJEEP2013COMPASS LATITUDE, 2.4L ENG VIN B, AWD, TRANS MFR CD CVT2LREPAIR AND DIAGNOSISRESTRAINTSRESTRAINTS CONTROL SYSTEMSRESTRAINTS SYSTEM (SERVICE INFORMATION)SPECIFICATIONSSPECIFICATIONSTORQUE
2013 Jeep Compass Latitude, 2.4L Eng VIN B, AWD, Trans Mfr CD CVT2L
Restraints System (Service Information): Specifications: Specifications: Torque
2013 Jeep Compass Latitude, 2.4L Eng VIN B, AWD, Trans Mfr CD CVT2LSECTION Torque
TORQUE SPECIFICATIONS
| TORQUE SPECIFICATIONSÂ | |||
|---|---|---|---|
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
| Child Anchor Bracket Mounting Nut | 80 | 59 | - |
| Clockspring Mounting Screw | 3 | - | 27 |
| Curtain Airbag Mounting Screw | 5.5 | - | 50 |
| Driver Airbag (Horn Switch) Mounting Screws | 13 | 10 | - |
| Front Impact Sensor Mounting Nut | 8 | - | 70 |
| Side Impact Sensor Mounting Screw | 8 | - | 70 |
| Occupant Restraint Controller Mounting Nut | 9 | - | 80 |
| Passenger Airbag Mounting Nut | 6 | - | 55 |
| Seat Airbag Mounting Nut | 10 | - | 89 |
| Front Seat Belt Buckle Lower Anchor Mounting Screw | 45 | 33 | - |
| Second Row Seat Belt Buckle Anchor Plate Mounting Screw | 58 | 43 | - |
| Front Seat Belt Retractor Mounting Screw | 40 | 30 | - |
| Front Seat Belt Turning Loop Mounting Screw | 40 | 30 | - |
| Front Seat Belt Lower Anchor Mounting Screw | 40 | 30 | - |
| Second Row Seat Belt Retractor Mounting Screw | 40 | 30 | - |
| Second Row Outboard Seat Belt Turning Loop Mounting Screw | 40 | 30 | - |
| Second Row Outboard Seat Belt Lower Anchor Mounting Screw | 58 | 43 | - |
| Turning Loop Height Adjuster Mounting Screw | 40 | 30 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.