Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2013COMPASS 2WD L4-2.4LREPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSNORMAL SERVICE48000 MI OR 76800 KM
2013 Jeep Compass 2WD L4-2.4L
48000 MI or 76800 KM
2013 Jeep Compass 2WD L4-2.4LSECTION 48000 MI or 76800 KM
Inspect
Parking Brake System
Inspect brake pads, shoes, rotors, drums, hoses and park brake.
Fluid - A/T
Inspect automatic transmission fluid if equipped with dipstick.
Exhaust System
Inspect exhaust system.
Cooling System
Inspect engine cooling system protection and hoses.
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, hoses and park brake.
Battery
Inspect battery and clean and tighten terminals as required.
Replace
Oil Filter, Engine
Engine Oil
Rotate
Tires
Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on.
Parking Brake System
Inspect brake pads, shoes, rotors, drums, hoses and park brake.
Fluid - A/T
Inspect automatic transmission fluid if equipped with dipstick.
Exhaust System
Inspect exhaust system.
Cooling System
Inspect engine cooling system protection and hoses.
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, hoses and park brake.
Battery
Inspect battery and clean and tighten terminals as required.
Replace
Oil Filter, Engine
Engine Oil
Rotate
Tires
Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.