Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2011LIBERTY 2WD V6-3.7LREPAIR AND DIAGNOSISBODY AND FRAMEROOF AND ASSOCIATED COMPONENTSSUNROOF / MOONROOFSERVICE AND REPAIRFULL OPEN RETRACTABLE ROOFCAM PLATE - INSTALLATION
2011 Jeep Liberty 2WD V6-3.7L
Cam Plate - Installation
2011 Jeep Liberty 2WD V6-3.7LSECTION Cam Plate - Installation
INSTALLATION
1. Install the cam plate (2) and install the rivet (3).
2. Install the screw (1).
3. Install the stud nut (4) from inside the vehicle and tighten to 5 Nm (44 in. lbs.).
4. Install the headliner, Headliner - Installation.
5. Re-initialize ECU, Full Open Retractable Roof.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.