Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2011GRAND CHEROKEE OVERLAND, 5.7 T, RWDREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
2011 Jeep Grand Cherokee Overland, 5.7 T, RWD
Quick Lookups: Fluids
2011 Jeep Grand Cherokee Overland, 5.7 T, RWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.00 OZS. | 0.11 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.38 LBS. | 0.62 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD 545RFE,RWD | Overhaul | 14.80 QTS. | 14 L | Automatic Transmission Fluid Plus 4 or equivalent | Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S |
| Automatic Transmission Fluid | Trans Mfr CD 545RFE,RWD | Service Fill | 5.50 QTS. | 5.2 L | Automatic Transmission Fluid Plus 4 or equivalent | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Front Axle,195FIA FE | 0.90 QTS. | 0.85 L | MOPAR Gear and Axle Lubricant, SAE 75W-85 | S | ||
| Differential Gear Oil | Front Axle,195FIA | 1.20 QTS. | 1.13 L | MOPAR Gear and Axle Lubricant, SAE 75W-85 | S | ||
| Differential Gear Oil | Rear Axle,195RIA (Aluminum) | 1.00 QTS. | 0.94 L | MOPAR Gear and Axle Lubricant, SAE 75W-85 | S | ||
| Differential Gear Oil | Rear Axle,215RII (Cast Iron) | 1.30 QTS. | 1.23 L | MOPAR Gear and Axle Lubricant, SAE 75W-85 | S | ||
| Differential Gear Oil | Rear Axle,225RII (Cast Iron) | 1.50 QTS. | 1.41 L | MOPAR Gear and Axle Lubricant, SAE 75W-85 | S | ||
| Differential Gear Oil | Rear Axle,230RIA w/ELSD (Aluminum) | 1.40 QTS. | 1.32 L | MOPAR Gear and Axle Lubricant with Modifier, SAE 75W-85 | Part No. 68083381 AA. | S | |
| Differential Gear Oil | Rear Axle,230RIA w/o ELSD (Aluminum) | 1.20 QTS. | 1.13 L | MOPAR Gear and Axle Lubricant, SAE 75W-85 | S | ||
| Engine Coolant | 5.7L Eng | w/o Trailer Towing Package | 15.40 QTS. | 14.57 L | MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S |
| Engine Coolant | 5.7L Eng | w/Trailer Towing Package | 16.00 QTS. | 15.14 L | MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S |
| Engine Oil | 5.7L Eng | w/Filter | 7.00 QTS. | 6.62 L | API - SAE 5W-20 | S | |
| Fuel Tank | 24.00 GALS. | 90.84 L | S | ||||
| Power Steering Fluid | Belt Driven Pump | N/A | N/A | MOPAR Power Steering Fluid Plus 4 | If MOPAR Power Steering Fluid +4 is not available, then MOPAR ATF +4 Automatic Transmission Fluid (05013457AA), is acceptable. | S | |
| Power Steering Fluid | Electric Pump | N/A | N/A | Hydraulic Power Steering Fluid meeting MS-11655 | There is an Electro-Hydraulic Power Steering (EHPS) pump on some vehicles requiring a different fluid. Do not mix power steering fluid types. Damage may result to the power steering pump and system if any other fluid is used. The mechanical power steering pump systems on this vehicle require the use of Power Steering Fluid +4, which meets material specification MS-9602 or equivalent. The EHPS system uses fluid which meets material specification MS-11655 or equivalent. Do not overfill. | S | |
| Transfer Case Fluid | MP2010 | 0.55 QTS. | 0.52 L | Automatic Transmission Fluid approved to MB 236.10, MB 236.12 such as Shell ATF 3403/M-115, Fuchs/Shell ATF 3353, or equivalent. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Solvent only | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.