Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2011COMPASS LIMITED, AWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 17 (ELECTRONIC CONTROL MODULES (SERVICE INFORMATION) - MK)MODULE, TRANSMISSION CONTROL (TCM)STANDARD PROCEDURESTANDARD PROCEDURE - TRANSMISSION CONTROL MODULE INITIALIZATIONRELEARN, AFTER REPLACING A TRANSAXLE
2011 Jeep Compass Limited, AWD, Standard
Relearn, After Replacing A Transaxle
2011 Jeep Compass Limited, AWD, StandardSECTION Relearn, After Replacing A Transaxle
WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition key to RUN.
- Clear learning memory using the scan tool.
- Turn the ignition key to OFF/LOCKED for 2 seconds.
- Turn the ignition key to RUN Clear DTCs.
- Turn the ignition key to OFF/LOCKED for 2 seconds.
- Turn ignition key to RUN.
- After at least 7 seconds, read DTCs.
- If DTCs resets refer to DIAGNOSIS AND TESTING .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.