Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2011COMPASS 2WD L4-2.4LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINETUNE-UP AND ENGINE PERFORMANCE CHECKSAIR CLEANER HOUSINGSERVICE AND REPAIRAIR CLEANER BODY - REMOVAL
2011 Jeep Compass 2WD L4-2.4L
Air Cleaner Body - Removal
2011 Jeep Compass 2WD L4-2.4LSECTION Air Cleaner Body - Removal
REMOVAL - AIR CLEANER BODY
1. Unlock the retainers (2) and remove the fresh air inlet duct (3) from air cleaner body (1).
2. Remove the bolts (3) that secure the PCM (4) to the air cleaner body cover and position aside.
3. Remove the air inlet tube (2) from the air cleaner body (1).
4. Disconnect the make-up air hose (3) from the air cleaner body.
5. Remove the support bracket bolt from the strut tower.
6. Pull upward to disengage the pins from the rubber grommets and remove the air cleaner body (1).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.