SYS.OK|MANUAL.DB● LIVE
2010 Jeep Grand Cherokee Limited, 5.7 T, 4WD

Quick Lookups: Fluids

2010 Jeep Grand Cherokee Limited, 5.7 T, 4WDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.50 OZS. 0.13 L PAG 46 S
Air Cond Refrigerant 1.69 LBS. 0.76 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD 545RFE,4WD Overhaul 16.90 QTS. 15.99 L Automatic Transmission Fluid Plus 4 or equivalent Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. S
Automatic Transmission Fluid Trans Mfr CD 545RFE,4WD Service Fill 6.50 QTS. 6.15 L Automatic Transmission Fluid Plus 4 or equivalent S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Front Axle C200F & C200FE 3.60 PTS. 1.7 L MOPAR Synthetic Gear Oil, SAE 75W-140 Limited-Slip Axles required the addition of 118 ml (4 oz.) MOPAR Limited Slip Additive. S
Differential Gear Oil Rear Axle C213R RE 4.40 PTS. 2.08 L MOPAR Synthetic Gear Oil, SAE 75W-140 Limited-Slip Axles required the addition of 118 ml (4 oz.) MOPAR Limited Slip Additive. S
Differential Gear Oil Rear Axle C213R 4.40 PTS. 2.08 L MOPAR Synthetic Gear Oil, SAE 75W-140 S
Engine Coolant 5.7L Eng 14.50 QTS. 13.72 L MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Includes: heater and coolant recovery tank filled to "max" level. S
Engine Oil 5.7L Eng w/Filter 7.00 QTS. 6.62 L API - SAE 5W-20 SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available. S
Fuel Tank 5.7L Eng 87 Octane Acceptable - 89 Octane Recommended 21.00 GALS. 79.49 L S
Power Steering Fluid N/A N/A MOPAR Hydraulic System Power Steering Fluid Part No. 05142893AA. S
Transfer Case Fluid T/Case Mfr CD NV245 3.80 PTS. 1.79 L MOPAR NV245 Transfer Case Fluid S
Windshield Washer Fluid N/A N/A Windshield Antifreeze Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.