Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2010COMPASS SPORT, 2.4 B, ED3, FWD, STANDARDREPAIR AND DIAGNOSISBRAKESMECHANICAL - HYDRAULICMECHANICAL BRAKE SYSTEM - BASE (SERVICE INFORMATION)SPECIFICATIONSTORQUE
2010 Jeep Compass Sport, 2.4 B, ED3, FWD, Standard
Mechanical Brake System - Base (Service Information): Specifications: Torque
2010 Jeep Compass Sport, 2.4 B, ED3, FWD, StandardSECTION Torque
TORQUE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| ABS ICU Mounting Bolt (To Bracket) | 11 | - | 97 |
| ABS ICU Mounting Pins | 11 | - | 97 |
| ABS ICU Mounting Bracket Screws (To Frame) | 23 | 17 | 203 |
| ABS ICU Mounting Bracket Screw And Nut (To Frame) - Right-Hand-Drive | 23 | 17 | 203 |
| ABS ABM Mounting Screws (To HCU) | 2 | - | 17 |
| ABS Dynamics Sensor Mounting Nuts | 9 | 6.5 | 80 |
| ABS Wheel Speed Sensor Head Mounting Screw - Front | 12 | 9 | 106 |
| ABS Wheel Speed Sensor Head Mounting Screw - Rear | 10 | 7 | 89 |
| ABS Wheel Speed Sensor Routing Bracket Mounting Screw | 18 | 13 | 160 |
| Brake Flex Hose Banjo Bolt - Front Caliper | 24 | 18 | 210 |
| Brake Flex Hose Fitting- Rear Caliper | 15 | 11 | 133 |
| Brake Pedal/Booster Mounting Nuts | 23 | 17 | 200 |
| Brake Tube Nuts | 17 | 12.5 | 150 |
| Disc Brake Caliper Adapter Bracket (To Knuckle) - Front | 108 | 80 | - |
| Disc Brake Caliper Adapter Bracket (To Support) - Rear | 71 | 52 | - |
| Disc Brake Caliper Guide Pin Bolts - Front | 43 | 32 | - |
| Disc Brake Caliper Guide Pin Bolts - Rear | 43 | 32 | - |
| Disc Brake Caliper Bleeder Screw | 8 | 6 | 71 |
| Drum Brake Wheel Cylinder Mounting Screws | 13 | - | 115 |
| Drum Brake Wheel Cylinder Bleeder Screw | 10 | - | 89 |
| Fluid Reservoir Mounting Screw | 5.5 | 4 | 48 |
| Master Cylinder Mounting Nuts | 25 | 18 | 221 |
| Parking Brake Lever Mounting Nuts | 28 | 21 | 250 |
| Proportioning Valves | 30 | 22 | - |
| Wheel Mounting (Lug) Nuts | 135 | 100 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.