Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2010COMPASS LIMITED, EDG, AUTOMATIC CVTREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICAL2.4L ENGINE (SERVICE INFORMATION)SPECIFICATIONSTORQUE
2010 Jeep Compass Limited, EDG, Automatic CVT
2.4L Engine (Service Information): Specifications: Torque
2010 Jeep Compass Limited, EDG, Automatic CVTSECTION Torque
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Balance Shaft Module | Refer to INSTALLATION Procedure. | ||
| Bell Housing-Bolts | 48 | 35 | - |
| Camshaft Bearing Cap-Bolts | - | - | - |
| M6 Bolts | 12 | - | 106 |
| M8 Bolts | 30 | 22 | - |
| Coils | 8 | - | 71 |
| Connecting Rod Cap-Bolts | 20 + 90° | 15 + 90° | - |
| Coolant Temperature Sender | 18 | 13 | - |
| Crankshaft Main Bearing Cap-Bolts | Refer to INSTALLATION Procedure. | ||
| Crankshaft Damper-Bolt | 210 | 155 | - |
| Cylinder Head-Bolts | Refer to INSTALLATION Procedure. | ||
| Cylinder Head Cover-Bolts | Refer to INSTALLATION Procedure. | ||
| Engine Support Bracket-Bolts | 40 | 30 | - |
| Exhaust Manifold-Bolts | 34 | 25 | - |
| Exhaust Manifold Heat Shield-Bolts | - | - | - |
| M6x25 mm Bolts | 7 | - | 62 |
| M6x70 mm Bolts | 9 | - | 80 |
| Flex Plate to Crankshaft-Bolts | 29 + 51° | 22 + 51° | - |
| Intake Manifold-Bolts | 24 | 18 | - |
| Ladder Frame | 22 | 16 | - |
| Oil Cooler Connector Bolt | 49 | 36 | - |
| Oil Filter | 14 | 10 | - |
| Oil Filter Nipple | 49 | 36 | - |
| Oil Jet Fastener | 12 | - | 106 |
| Oil Pan-Bolts | - | - | - |
| M6 Bolts | 9 | - | 80 |
| M8 Bolts | 24 | 18 | - |
| Oil Pan Drain-Plug | 40 | 30 | - |
| Oil Pressure Switch | 8 | - | 71 |
| PCV Valve | 5 | - | 44 |
| Phaser to Camshaft-Bolt | 59 | 44 | - |
| Spark Plugs | 27 | 20 | 239 |
| Timing Chain Cover | - | - | - |
| M6 Bolts | 9 | - | 80 |
| M8 Bolts | 26 | 19 | - |
| Timing Chain Tensioner Assembly-Bolts | 12 | - | 106 |
| Timing Chain Guides | 12 | - | 106 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.