Body - Interior & Exterior: Specifications: Specifications

2009 Jeep Wrangler Unlimited X, RWDSECTION Specifications
Description N.m Ft. Lbs In. Lbs.
A/C expansion valve nut 23 17 -
Backlite hinge bolts 10 - 90
Body isolator mounting bolts *Β  108 80 -
Body isolator to body nuts 54 40 -
Brake booster bracket nuts 18 13.5 -
Center OCS strain gauge stud nut 45 33 -
Door carrier plate screws 10 - 90
Door hinge pin nut 8.5 - 75
Door hinge to body bolts 28 21 -
Door hinge to hinge bolts 26 19 -
Door latch adjustment screw 3 - 26.5
Door latch mounting screws 8 - 71
Door latch striker bolts 26 19 -
Four door rear seat 40% inner seat back pivot nut 25 18.5 -
Four door rear seat center belt buckle bolt 61 45 -
Four door rear seat cushion pivot bolts 25 18.5 -
Four door rear seat front mounting fasteners 75 55 -
Four door rear seat headrest bolts 8 - 71
Four door rear seat inner latch floor bolts 25 18.5 -
Four door rear seat latch to back frame bolts 45 33 -
Four door rear seat outboard latch floor bolts 25 18.5 -
Four door rear seat rear mounting bolt 75 55 -
Four door rear seat rear mounting nuts 85 62.5 -
Four door rear seat cushion pivot bolt 25 18.5 -
Four door retractor screw 55 41 -
Four door seat cushion pivot bolt 25 18.5 -
Front door exterior handle nut 4.5 - 40
Front door glass run nut 10 - 90
Front door interior handle screw 8.5 - 75
Front seat back assembly bolts 47 34.5 -
Front seat belt anchor bolt 40 29.5 -
Front seat belt buckle bolt 50 37 -
Front seat belt turning loop screw 40 29.5 -
Front seat mounting bolts 75 55 -
Front seat riser nuts 28 21 -
Half door latch nut 4.5 - 40
Hard top front bolts 8 - 71
Hard top side bolts 8 - 71
Hood catch bracket nuts 7 - 62
Hood catch nuts 15 11 -
Hood hinge to body bolts 24 18 -
Hood hinge to hood bolts 26 19 -
Hood safety catch bolt 11 8 97
Instrument panel center support bracket fasteners 8 6 71
Instrument panel fence line nuts 12 9 -
Instrument panel side support bolts 11 8 -
Lower fender to sill bolts 12 9 -
Manual sifter bolt 33 24.5 -
OCS riser nuts 28 21 -
Outside rear view mirror bolts 13 10 -
Rear door exterior handle nut 4.5 - 40
Rear door glass run bolt 12 9 -
Rear door glass run nut 10 - 90
Rear door interior handle screw 8.5 - 75
Rear view mirror set screw 2 - 18
Seat side airbag nuts 7 - 62
Side step bracket bolts 24 18 -
Side step sill nuts 12 9 -
Soft top pivot knuckle bolts 14 10 -
Speaker pod screws 10 - 90
Sport bar cross bar bracket bolts 19 14 -
Sport bar front cross bar bracket bolts 19 14 -
Sport bar rear bolts 19 14 -
Sport bar rear cross bar bracket bolts 19 14 -
Sport bar side bar bolts 19 14 -
Sport bar side bar to windshield frame bolts 23 17 -
Sport bar to B-pillar bolts 19 14 -
Steering column opening reinforcement plate bolts 11 8 -
Tailgate exterior handle nuts 4.5 - 40
Tailgate hinge to body bolts 26 19 -
Tailgate hinge to tailgate bolts 20 15 -
Tailgate latch screws 8 - 71
Tailgate stabilizer insert and cup bolts 10 - 90
Tailgate striker bolts 28 21 -
Two door rear seat back frame to cushion bolts 50 37 -
Two door rear seat back latch bolts 45 33 -
Two door rear seat center belt buckle bolt 55 41 -
Two door rear seat cushion to back bolts 50 37 -
Two door rear seat front latch cushion frame bolts 45 33 -
Two door rear seat rear latch nuts 10 - 90
Upper fender fasteners 5 - 44
Windshield frame hinge to body bolts 20 15 -
Windshield frame reinforcement bracket bolts 20 15 -
CAUTION: * Whenever a body isolator bolt requires servicing or tightening, it is necessary to remove the bolt and install new thread locker compound to the threads.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.