SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009WRANGLER SAHARA, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCONNECTOR END VIEWSCONNECTOR PIN-OUTSPOWERTRAIN CONTROL MODULE (GAS) CONNECTOR END VIEW (C1)
2009 Jeep Wrangler Sahara, Standard

Powertrain Control Module (Gas) Connector End View (C1)

2009 Jeep Wrangler Sahara, StandardSECTION Powertrain Control Module (Gas) Connector End View (C1)
MODULE-POWERTRAIN CONTROL C1 - BLACK/BLACK 38 WAY (GAS)

GJK880174Courtesy of CHRYSLER CORP.
CAV  CIRCUIT  FUNCTION 
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -
9 Z903 16BK/LG GROUND
10 A209 16RD FUSED B(+)
11 F202 18PK/GY FUSED RUN/START RELAY OUTPUT
12 F1 18PK/WT IGNITION SWITCH OUTPUT (UNLOCK-RUN-START)
13 - -
14 - -
15 - -
16 - -
17 - -
18 Z903 16BK/LG GROUND
19 - -
20 G6 18VT/GY EOP SIGNAL
21 - -
22 - -
23 - -
24 A804 16RD/GY GEN SENSE
25 - -
26 - -
27 F856 18YL/PK 5 VOLT SUPPLY
28 - -
29 A209 16RD FUSED B(+)
30 - -
31 K141 18DB/YL O2 1/2 SIGNAL
32 K904 18DB/DG O2 RETURN (DOWN)
33 K243 18BR O2 2/2 SIGNAL
34 D65 18WT/BK CAN C BUS (+)
35 D64 18WT/LB CAN C BUS (-)
36 - -
37 - -
38 F342 16BR/WT FUSED ASD RELAY OUTPUT
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.