SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009WRANGLER SAHARA, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCONNECTOR END VIEWSCONNECTOR PIN-OUTSPOWERTRAIN CONTROL MODULE (DIESEL) CONNECTOR END VIEW (C4)
2009 Jeep Wrangler Sahara, Standard

Powertrain Control Module (Diesel) Connector End View (C4)

2009 Jeep Wrangler Sahara, StandardSECTION Powertrain Control Module (Diesel) Connector End View (C4)
MODULE-POWERTRAIN CONTROL C4 - BLACK/GREEN 38 WAY (DIESEL)

GJK880178Courtesy of CHRYSLER CORP.
CAV  CIRCUIT  FUNCTION 
1 T60 16YL/GY OD CONTROL
2 T259 16YL/DG 4C CONTROL
3 - -
4 T140 16YL/GY MS CONTROL
5 - -
6 T219 16YL/LG 2C CONTROL
7 - -
8 T59 16YL/LB UD CONTROL
9 - -
10 T20 16DG/WT L/R CONTROL
11 T118 16DG LP VFS CONTROL
12 Z903 16BK GROUND
13 Z903 16BK GROUND
14 Z903 16BK GROUND
15 T1 18DG/LB TRS T1 SIGNAL
16 T3 18DG/DB TRS T3 SIGNAL
17 - -
18 T15 20YL/BR TRANSMISSION CONTROL
19 T16 16YL/OR TRANSMISSION CONTROL OUTPUT
20 T48 18BR/YL 4C PRESSURE SIGNAL
21 T29 18YL/WT UD PRESSURE SIGNAL
22 T9 16DG/TN OD PRESSURE SIGNAL
23 - -
24 - -
25 - -
26 T4 18DG/LB TRS T2 SIGNAL
27 T41 18YL/DB TRS T41 SIGNAL
28 T16 16YL/OR TRANSMISSION CONTROL OUTPUT
29 T50 16YL/TN L/R PRESSURE SIGNAL
30 T147 18DG/YL 2C PRESSURE SIGNAL
31 T38 18YL/BR LINE PRESSURE SIGNAL
32 T14 18DG/BR OUTPUT SPEED SIGNAL
33 T52 18DG/OR INPUT SPEED SIGNAL
34 T13 18DG/VT SENSOR GROUND
34 T13 18DG/VT SENSOR GROUND
35 T54 18DG/OR TRANSMISSION TEMPERATURE SIGNAL
36 - -
37 T42 18DG/YL TRS T42 SIGNAL
38 T16 16YL/OR TRANSMISSION CONTROL OUTPUT
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.