Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009WRANGLER 2WD V6-3.8LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESPECIFICATIONSCAPACITY SPECIFICATIONS
2009 Jeep Wrangler 2WD V6-3.8L
Capacity Specifications
2009 Jeep Wrangler 2WD V6-3.8LSECTION Capacity Specifications
AUTOMATIC TRANSMISSION FLUID
Service Fill
45RFE/545RFE
4X2 5.2 liters (5.5 quarts)
4X4 6.2 liters (6.5 quarts)
42RLE 3.8 liters (8.0 pints)
Overhaul
45RFE/545RFE * 14-16 liters (14.8-16.9 quarts)
42RLE * 8.3 liters (17.6 pints)
* Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.