SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009LIBERTY 4WD V6-3.7LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTRANSMISSION CONTROL SYSTEMSTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURES
2009 Jeep Liberty 4WD V6-3.7L

Symptom Related Diagnostic Procedures

2009 Jeep Liberty 4WD V6-3.7LSECTION Symptom Related Diagnostic Procedures





PRNDL FAULT CLEARING PROCEDURE

1. With the scan tool, erase Transmission DTCs.
2. Cycle the ignition off, then start the vehicle.
3. Firmly apply the brakes and shift into Overdrive.

NOTE: Vehicle must remain in Overdrive for at least 3.0 seconds.

4. With the brakes firmly applied, shift slowly through all gears (PRNDL) as least three times, pausing momentarily in each gear.

NOTE: If all the PRNDL lights box individually then the error was cleared.

5. Shift into park and turn the ignition off to the lock position.
6. With the ignition on, engine not running, using the scan tool, read DTCs.

Does the DTC P0706 reset, or do all the PRNDL indicators remain boxed in park or neutral?

Yes

- Perform the diagnostic procedure for P0706-TRANSMISSION RANGE SENSOR RATIONALITY. P0706

No

- Test Complete.
- Perform 42RLE TRANSMISSION VERIFICATION TEST. Transmission Verification Test

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.