Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009GRAND CHEROKEE SRT-8 V8-6.1LREPAIR AND DIAGNOSISBODY AND FRAMEINTERIOR MOULDING / TRIMDASHBOARD / INSTRUMENT PANELSERVICE AND REPAIRSTEERING COLUMN OPENING COVER - REMOVAL
2009 Jeep Grand Cherokee SRT-8 V8-6.1L
Steering Column Opening Cover - Removal
2009 Jeep Grand Cherokee SRT-8 V8-6.1LSECTION Steering Column Opening Cover - Removal
REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove the bolts (3) and remove the drivers side hush panel (2).
3. Using a trim stick C-4755 or equivalent, separate the upper clips. and rotate the cover down and release the lower hinges at the bottom and remove the opening cover.
4. Rotate cover down to carpet and grasp part at its lower edge and pull up and rearward to snap off the lower hinge pins.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.