Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSJEEP2009GRAND CHEROKEE LIMITED, 3.7 K, AWDREPAIR AND DIAGNOSISELECTRICALFUSES & CIRCUIT BREAKERSCONNECTOR END VIEWS & ELECTRICAL COMPONENT LOCATIONS (2 OF 4)MODULE-VIDEO SCREEN C1 (D2373A)
2009 Jeep Grand Cherokee Limited, 3.7 K, AWD
Module-Video Screen C1 (D2373A)
2009 Jeep Grand Cherokee Limited, 3.7 K, AWDSECTION Module-Video Screen C1 (D2373A)
Harness-Family: Audio_Video
Color: DARK GRAY
Gender: FEMALE
Part Number: 917989-6
Part Description: INSULATOR
Connector No: D2373A
Option: Standard
Repair Kit Part Number: 05083221AA
Cavity Count: 22
| Pin | Circuit | Wire Color | Gauge/Size | Function | Option |
|---|---|---|---|---|---|
| A1 | A114 | GY | 20 | FUSED B(+) | N/A |
| A10 | X542 | GY | 20 | VIDEO COMMON 2 | N/A |
| A11 | X541 | GY | 20 | VIDEO SIGNAL 2 | N/A |
| A12 | X539 | DG | 20 | AUDIO LEFT 1 | N/A |
| A13 | X538 | DG | 20 | AUDIO RIGHT 1 | N/A |
| A14 | X546 | GY | 20 | AUDIO RETURN 2 | N/A |
| A18 | X534 | GY | 20 | VIDEO SIGNAL 1 | N/A |
| A19 | X535 | GY | 20 | VIDEO COMMON 1 | N/A |
| A2 | X540 | GY | 20 | AUDIO RETURN 1 | N/A |
| A20 | X552 | GY | 20 | AUDIO RETURN 3 | N/A |
| A21 | X543 | DG | 20 | VIDEO SHIELD 2 | N/A |
| A22 | Z915 | BK | 20 | GROUND | N/A |
| A3 | X545 | DG | 20 | AUDIO LEFT 2 | N/A |
| A4 | X544 | DG | 20 | AUDIO RIGHT 2 | N/A |
| A5 | D55 | WT | 20 | CAN B (+) | N/A |
| A6 | D54 | WT | 20 | CAN B (-) | N/A |
| A7 | X536 | DG | 20 | VIDEO SHIELD 1 | N/A |
| A8 | X551 | DG | 20 | AUDIO LEFT 3 | N/A |
| A9 | X550 | DG | 20 | AUDIO RIGHT 3 | N/A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.