Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009GRAND CHEROKEE 2WD V8-4.7LREPAIR AND DIAGNOSISAPPLICATION AND IDBODY CODE PLATE
2009 Jeep Grand Cherokee 2WD V8-4.7L
Body Code Plate
2009 Jeep Grand Cherokee 2WD V8-4.7LSECTION Body Code Plate
BODY CODE PLATE DESCRIPTION
The Body Code Plate is located in the engine compartment on the right headlamp mounting bracket! radiator support. There are seven lines of information on the body code plate. Lines 4, 5, 6, and 7 are not used to define service information. Information reads from left to right, starting with line 3 in the center of the plate to line 1 at the bottom of the plate.
NOTE: Paint Code may also be found on vehicle certification label on inside of driver side door jamb.
The Body Code Plate is located in the engine compartment on the right headlamp mounting bracket! radiator support. There are seven lines of information on the body code plate. Lines 4, 5, 6, and 7 are not used to define service information. Information reads from left to right, starting with line 3 in the center of the plate to line 1 at the bottom of the plate.
NOTE: Paint Code may also be found on vehicle certification label on inside of driver side door jamb.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.