SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009COMMANDER LIMITED, 5.7 T, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCONNECTOR END VIEWSCONNECTOR PIN-OUTSPOWERTRAIN CONTROL MODULE CONNECTOR END VIEW (C2)
2009 Jeep Commander Limited, 5.7 T, RWD

Powertrain Control Module Connector End View (C2)

2009 Jeep Commander Limited, 5.7 T, RWDSECTION Powertrain Control Module Connector End View (C2)
MODULE-POWERTRAIN CONTROL C2 - BLACK/ORANGE 38-WAY

GXK780252Courtesy of CHRYSLER CORP.
CAV  CIRCUIT  FUNCTION 
1 K10 16DB/OR COIL CONTROL NO. 6
2 K16 16DB/YL COIL CONTROL NO. 5
3 K15 16DB COIL CONTROL NO. 4
4 K58 16BR/VT INJECTOR CONTROL NO. 6
5 K38 16BR/OR INJECTOR CONTROL NO. 5
6 K124 18DB/GY ETC MOTOR (+) (3.7L/5.7L)
7 K93 16DB COIL CONTROL NO. 3
8 K35 20DB/VT EGR SOL CONTROL
9 K85 16DB/YL COIL CONTROL NO. 2
10 K86 16YL/DB COIL CONTROL NO. 1
11 K14 16BR/TN INJECTOR CONTROL NO. 4
12 K13 16BR/LB INJECTOR CONTROL NO. 3
13 K12 16BR/DB INJECTOR CONTROL NO. 2
14 K11 16BR/YL INJECTOR CONTROL NO. 1
15 K922 18BR/DB TP SENSOR RETURN (3.7L/5.7L)
16 K453 18BR/DG MDS SOL CONTROL NO. 6 (5.7L)
17 K199 20BR/VT O2 2/1 HEATER CONTROL
18 K99 20BR/TN O2 1/1 HEATER CONTROL
19 K125 16BR/DG GEN FIELD CONTROL
20 K2 20VT/OR ECT SIGNAL
21 K22 18BR/OR TP NO. 1 SIGNAL
22 K34 20DB/LG EGR SIGNAL
23 K1 20VT/BR MAP SIGNAL
24 K942 20BR/LG KNOCK SENSOR NO. 1 RETURN
25 K42 20DB/OR KNOCK SENSOR NO. 1 SIGNAL
26 - -
27 K900 20DB/DG SENSOR GROUND
28 K122 18BR/DG TP NO. 2 SIGNAL (3.7L/5.7L)
28 K961 20BR/GY IAC SIGNAL (4.7L)
29 F855 20PK/YL 5 VOLT SUPPLY
30 K21 20BR/WT IAT SIGNAL
31 K41 20DB/LB O2 1/1 SIGNAL
32 K904 20DB/WT O2 RETURN (DOWNSTREAM)
34 K44 20GY/DB CMP SIGNAL
35 K24 20BR CKP SIGNAL
36 K242 20OR/WT KNOCK SENSOR NO. 2 SIGNAL (3.7L/5.7L)
36 K242 20BR/WT KNOCK SENSOR NO. 2 SIGNAL (4.7L)
37 K924 20WT/BR KNOCK SENSOR NO. 2 RETURN
38 K126 18DB/LG ETC MOTOR (-) (3.7L/5.7L)
38 K61 18VT/GY IAC CONTROL (4.7L)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.