Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009COMMANDER 4WD V8-5.7LREPAIR AND DIAGNOSISINSTRUMENT PANEL, GAUGES AND WARNING INDICATORSDASHBOARD / INSTRUMENT PANELSERVICE AND REPAIRINSTRUMENT PANEL BEZEL - REMOVALCENTER BEZEL
2009 Jeep Commander 4WD V8-5.7L
Center Bezel
2009 Jeep Commander 4WD V8-5.7LSECTION Center Bezel
REMOVAL
1. Remove the 16 screws and using a trim stick C-4755 or equivalent, separate the trim bezel and remove.
2. Using a trim stick C-4755 or equivalent, remove the shifter bezel ring.
3. Using a trim stick C-4755 or equivalent, remove the shifter bezel.
4. Using a trim stick C-4755 or equivalent, remove the center bezel and disconnect the electrical connectors.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.