Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008LIBERTY SPORT, RWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 133 (BODY - INTERIOR & EXTERIOR)SPECIFICATIONSTORQUE SPECIFICATIONS
2008 Jeep Liberty Sport, RWD, Automatic
Torque Specifications
2008 Jeep Liberty Sport, RWD, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2008 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| All seat belt anchor bolts | 40 N.m | 30 ft. lbs. | - |
| All seat belt anchor nuts | 40 N.m | 30 ft. lbs. | - |
| All seat belt retractor bolts | 40 N.m | 30 ft. lbs. | - |
| Decklid Hinge | 33 N.m | 24 ft. lbs. | - |
| Front door and aft screws | 8.5 N.m | - | 75 in. lbs |
| Front rail seals | 5.5 N.m | - | 49 in. lbs |
| Front seat riser to adjuster nuts | 25 N.m | 18 ft. lbs. | - |
| Front seat track to floor pan bolts | 55 N.m | 40 ft. lbs. | - |
| Front seat inboard pivot bolt | 40 N.m | 30 ft. lbs. | - |
| Front seat recliner to seat cushion frame | 12 N.m | 9 ft. lbs. | - |
| Front seat weight sensor adjuster track studs | 28 N.m | 21 ft. lbs. | - |
| Front seat track to cushion frame bolt | 12 N.m | 9 ft. lbs. | - |
| Front seat back | 40 N.m | 30 ft. lbs. | - |
| Front seat back recliner to seat back | 12 N.m | 9 ft. lbs. | - |
| Front door hinge to hinge pillar bolt | 28 N.m | 21 ft. lbs. | - |
| Front door hinge to door nuts and bolt | 28 N.m | 21 ft. lbs. | - |
| Front door latch striker | 28 N.m | 21 ft. lbs. | - |
| Glass door fasteners | 7.3 N.m | 6.5 ft. lbs | - |
| Header latch to windshield screws | 28 N.m | 21 ft. lbs | - |
| Hood hinges | 28 N.m | 21 ft. lbs | - |
| Hood hinge to fender | 33 N.m | 24 ft. lbs | - |
| Hood latch striker | 13.5 N.m | 10 ft. lbs. | - |
| Hood latch to radiator | 28 N.m | 21 ft. lbs. | - |
| Instrument panel support bolts | 6 N.m | - | 55 in. lbs. |
| Instrument support panel drivers side bracket | 27 N.m | 20 ft. lbs | - |
| Instrument support panel passenger side bracket | 27 N.m | 20 ft. lbs | - |
| Liftgate latch striker | 22 N.m | 16 ft. lbs. | - |
| Latch | 16 N.m | 12 ft. lbs | - |
| Liftgate hinge bolts (Center) | 12 N.m | - | 105 in. lbs. |
| Liftgate hinge bolts (outer) | 33 N.m | 24 ft. lbs. | - |
| Pivot Bolts | 28 N.m | 21 ft. lbs. | - |
| Quarter glass to body | 8.5 N.m | - | 75 in. lbs |
| Rear door glass to regulator bolt | 11 N.m | - | 105 in. lbs |
| Rear door hinge to B-pillar bolt | 28 N.m | 21 ft. lbs. | - |
| Rear door latch striker | 28 N.m | 21 ft. lbs | - |
| Rear seat back and seat belt buckle anchor nut | 57 N.m | 42 ft. lbs. | - |
| Rear seat latch attaching bolts | 12.5 N.m | - | 110 in. lbs. |
| Striker | 28 N.m | 21 ft. lbs | - |
| Track assembly track to pan bolts | 12 N.m | 9 ft. lbs. | - |
| Weight sensor stud bolts | 45 N.m | 33 ft. lbs. | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.