Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Distribution: Module-Inverter: Description: Description
The inverter module is located under the right rear seat cushion. The A/C outlet is mounted in the rear of the center floor console. The inverter module provides A/C power for user accessories when the 115 Volt AC outlet switch (4) in the instrument panel center stack (1) is in the "ON" position. The inverter converts the 12 Volt DC from the vehicle battery system to a 115 Volt AC output. The outlet switch is part of the accessory switch bank assembly and is not available for service as an individual part. If the switch is damaged or inoperative the complete accessory switch bank assembly must be replaced. Refer to REMOVAL for the appropriate procedure.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.