Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSJEEP2008COMPASS LIMITED, FWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)DRIVELINES & AXLESDIFFERENTIALS & DRIVE AXLESDIFFERENTIAL & DRIVELINEMODULE-REAR DRIVELINESTANDARD PROCEDUREREAR DRIVELINE MODULE

2008 Jeep Compass Limited, FWD, Standard

Rear Driveline Module

2008 Jeep Compass Limited, FWD, StandardSECTION Rear Driveline Module

Fig 1: DRAIN AND FILL PLUGS

Courtesy of CHRYSLER LLC

Remove fill plug (1) and drain plug (2). Drain fluid.
Install drain plug (2) and tighten to 32 N.m (24 ft.lb.).
Fill with MOPAR® MS9020 SAE 80W90 Gear Lube to bottom of fill plug.
Install fill plug (1) and tighten to 32 N.m (24 ft.lb.).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.