Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMPASS 4WD L4-2.0LREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSWINDOW GLASSLIFTGATE WINDOW GLASSSERVICE AND REPAIRREMOVAL
2008 Jeep Compass 4WD L4-2.0L
Removal
2008 Jeep Compass 4WD L4-2.0LSECTION Removal
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Remove the spoiler (1), Liftgate Spoiler - Removal.
3. Remove the liftgate handle (1),Removal.
4. Remove the rear wiper arm (3), Wiper Arms - Removal.
NOTE: Windshield removal shown, liftgate glass similar.
5. Disconnect the heated liftgate glass electrical connectors, if equipped.
6. Using a windshield cut-out wire (4) or other suitable tool, separate the adhesive (2).
7. Carefully remove liftgate glass.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.