Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMMANDER OVERLAND, RWDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSENGINE & AUTOMATIC TRANSMISSION COOLING SYSTEMSPECIFICATIONSTORQUE
2008 Jeep Commander Overland, RWD
Engine & Automatic Transmission Cooling System: Specifications: Torque
2008 Jeep Commander Overland, RWDSECTION Torque
| 24 | N.m | Ft. Lbs. | In. Lbs. | ||
|---|---|---|---|---|---|
| Automatic Belt Tensioner to Mounting Bracket Bolt | - | - | - | ||
| 3.7L | 41 | 30 | - | ||
| 4.7L | 41 | 30 | - | ||
| 5.7L | 41 | 30 | - | ||
| 3.0L DIESEL | 47 | 30 | - | ||
| Automatic Belt Tensioner Pulley Bolt | - | - | - | ||
| 3.7L | 61 | 45 | - | ||
| 4.7L | 61 | 45 | - | ||
| 5.7L | 61 | 45 | - | ||
| Block Heater Bolt | - | - | - | ||
| 3.7L | 2 | - | 17 | ||
| 4.7L | 2 | - | 17 | ||
| 5.7L | 2 | - | 17 | ||
| Fan Blade Assembly to Viscous Drive Bolts | - | - | - | ||
| 4.7L | 23 | - | 200 | ||
| Generator Mounting Bolts 4.7L | 57 | 42 | - | ||
| Radiator Upper Isolator to Crossmember Nuts | 3 | - | 20 | ||
| Radiator Upper Isolator to Radiator Nuts | 4 | - | 36 | ||
| Radiator Brace Bolts | 10 | - | 89 | ||
| Thermostat Housing Bolts | - | - | - | ||
| 3.7L | 22 | 16 | - | ||
| 4.7L | 13 | - | 115 | ||
| 5.7L | 13 | - | 115 | ||
| 3.0L DIESEL | 9 | - | 80 | ||
| Upper Radiator Crossmember to Body Bolts | 10 | - | 89 | ||
| Water Pump Bolts | - | - | - | ||
| 3.7L | 24 | 18 | - | ||
| 4.7L | (1) | - | - | ||
| 5.7L | 24 | 18 | - | ||
| 3.0L DIESEL | |||||
| M6 | 14 | 24 | - | ||
| M8 | 20 | - | 177 | ||
| Water Pump Pulley to Water Pump Bolts | - | - | - | ||
| 3.7L | 28 | - | 250 | ||
| High Pressure Inlet Hose to Hydraulic Fan Drive (1/2 inch Fitting) | 49 | 36 | - | ||
| High Pressure Outlet Hose to Steering Gear (3/8 inch Fitting) | 29 | 22 | - | ||
| Fan Shroud to Radiator Mounting Bolts | 6 | - | 50 | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.