Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMMANDER LIMITED, 5.7 2, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTSEATSBODY - INTERIOR & EXTERIORSPECIFICATIONSSPECIFICATIONS - TORQUE
2008 Jeep Commander Limited, 5.7 2, 4WD
Specifications - Torque
2008 Jeep Commander Limited, 5.7 2, 4WDSECTION Specifications - Torque
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| 2nd Row Lower Seat Belt Anchor Bolts | 37 | 29 | - |
| A-Pillar Trim Screws | 6 | 4 | 55 |
| DVD Support Bracket Bolts - Inner | 10 | 7 | 85 |
| DVD Support Bracket Bolts - Outer | 9 | 7 | 80 |
| Exterior Mirror Nuts | 7 | 5 | 60 |
| Fender Screws | 8.5 | - | 75 |
| Front Door Exterior Handle Screws | 7 | - | 60 |
| Front Door Glass Run Channel Fasteners | 7.5 | - | 65 |
| Front Door Hinge To A-Pillar Bolts | 28 | 21 | - |
| Front Door Hinge To Door Fasteners | 31 | 23 | - |
| Front Door Latch Adjust Screw | 4 | - | 35 |
| Front Door Latch Screws | 10.5 | - | 95 |
| Front Door Latch Striker Bolts | 28 | 21 | - |
| Front Door Regulator Bolts | 8.5 | - | 75 |
| Front Door Regulator Glass Clamp Screws | 12 | - | 105 |
| Front Door Trim Panel Screws | 2 | - | 16 |
| Front Seat Back Bolts | 40 | 30 | - |
| Front Seat Belt Anchor Bolt | 39 | 29 | - |
| Front Seat Belt Buckle Bolt | 43 | 32 | - |
| Front Seat Belt Turning Loop Bolt | 39 | 29 | - |
| Front Seat Cushion Clamp Bolts | 10 | - | 85 |
| Front Seat Height Adjuster To Length Adjuster Bolts | 21 | 15 | - |
| Front Seat Manual Length Adjuster Bolts | 42 | 31 | - |
| Front Seat Strain Gauge Bolts - Inner | 45 | 33 | - |
| Front Seat Strain Gauge Bolts - Outer | 40 | 30 | - |
| Front Seat To Floor Bolts | 40 | 30 | - |
| Hood Hinge To Fender Rail Bolts | 12 | 9 | 105 |
| Hood Hinge To Hood Bolts | 28 | 21 | - |
| Hood Latch Nuts | 27 | 20 | - |
| Interior Grab Handle Screws | 2 | - | 20 |
| Instrument Panel Center Support Bracket Nuts | 12 | 9 | 105 |
| Instrument Panel Pedal Support Nuts | 12 | 9 | 105 |
| Instrument Panel Side Support Bolts | 11 | 8 | 95 |
| Liftgate Exterior Handle Nuts | 6 | - | 55 |
| Liftgate Glass Hinge To Liftgate Bolts | 12 | 9 | 105 |
| Liftgate Glass Latch To Liftgate Nuts | 12.5 | 9 | 110 |
| Liftgate Hinge To Body Nuts | 28 | 21 | - |
| Liftgate Hinge To Gate Bolts | 28 | 21 | - |
| Liftgate Hinge To Body Header Bolt | 31 | 23 | - |
| Liftgate Latch Bolts | 17 | 12.5 | 150 |
| Liftgate Latch Striker Screws | 28 | 21 | - |
| Liftgate Support Cylinder Studs | 28 | 21 | - |
| Quarter Glass Nuts | 5 | 3 | 40 |
| Rear Door Exterior Handle Screws | 7 | - | 60 |
| Rear Door Glass Run Channel Fasteners | 8.5 | - | 75 |
| Rear Door Hinge To Body Bolts | 28 | 21 | - |
| Rear Door Hinge To Door Fasteners | 31 | 23 | - |
| Rear Door Latch Adjust Screw | 4 | - | 35 |
| Rear Door Latch Screws | 10.5 | - | 95 |
| Rear Door Latch Striker Bolts | 28 | 21 | - |
| Rear Door Regulator Bolts | 8.5 | - | 75 |
| Rear Door Regulator Glass Clamp Screws | 12 | - | 105 |
| Rear Grab Handle Screws | 8.5 | - | 75 |
| Rear Seat Back Bolts | 50 | 37 | - |
| Rear Seat Back Bracket Bolt | 50 | 37 | - |
| Rear Seat Cushion Bolts | 50 | 37 | - |
| Rear Seat Cushion Riser Bolts | 45 | 33 | - |
| Rear View Mirror Screw | 2 | - | 15 |
| Roof Rack Rail Screws | 4.5 | - | 40 |
| Steering Column Coupler Bolt | 49 | 36 | - |
| Steering Column Cross Bolt | 12 | 9 | - |
| Steering Column Support Bolts | 12 | 9 | 105 |
| Sunroof Assembly Screws | 9 | - | 80 |
| Sunroof Glass Panel Screws | 3.5 | - | 30 |
| Sun Visor Support Screws | 2 | - | 20 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.