Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMMANDER 4WD V8-4.7L FLEX FUELREPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSSEVERE SERVICE141000 MI OR 225600 KM
2008 Jeep Commander 4WD V8-4.7L Flex Fuel
141000 MI or 225600 KM
2008 Jeep Commander 4WD V8-4.7L Flex FuelSECTION 141000 MI or 225600 KM
Check
Coolant
Check the engine coolant/anti-freeze level, hoses and clamps.
Inspect
Vehicle
After completion of off-road operation, the underside of the vehicle should be thoroughly inspected. Examine threaded fasteners for looseness.
Exhaust System
Brake Hose/Line
Replace
Oil Filter, Engine
If not replaced at 3 months.
Engine Oil
If not replaced at 3 months.
Coolant
Check the engine coolant/anti-freeze level, hoses and clamps.
Inspect
Vehicle
After completion of off-road operation, the underside of the vehicle should be thoroughly inspected. Examine threaded fasteners for looseness.
Exhaust System
Brake Hose/Line
Replace
Oil Filter, Engine
If not replaced at 3 months.
Engine Oil
If not replaced at 3 months.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.