Inline (Diesel) Connector End View (C101)

2007 Jeep Patriot Limited, FWD, StandardSECTION Inline (Diesel) Connector End View (C101)
C101 - BLACK 14 WAY (DIESEL) FEMALE

GMK880031Courtesy of CHRYSLER CORP.
CAV  CIRCUIT  FUNCTION 
1 K844 20DB/YL CMP SENSOR 5 VOLT SUPPLY
2 K44 20DB/GY CMP 1/1 SIGNAL
3 K944 20BK/GY CMP SENSOR GROUND
4 K853 20DB/BR CKP SENSOR 5 VOLT SUPPLY
5 K24 20BR/DB CKP SENSOR SIGNAL
6 K925 20DB/GY CKP SENSOR GROUND
7 G6 20VT/GY EOP SIGNAL
8 F343 16BR/YL FUSED MAIN RELAY OUTPUT (EXCEPT DPF)
9 K601 16BR/VT EGR AIR FLOW CONTROL (EXCEPT DPF)
10 K834 20DB/RD EGR 5 VOLT SUPPLY (DPF)
10 K604 20BR/WT EGR AIR FLOW SIGNAL (EXCEPT DPF)
11 K934 20RD/DB EGR SENSOR GROUND (DPF)
11 Z909 16BK GROUND (EXCEPT DPF)
12 K683 20RD/DG EGR SIGNAL (DPF)
13 K684 16RD EGR CONTROL 2 (DPF)
14 K682 16BR/RD EGR CONTROL 1 (DPF)


C101 - BLACK 14 WAY (DIESEL) MALE

GMK880032Courtesy of CHRYSLER CORP.
CAV  CIRCUIT  FUNCTION 
1 K844 20DB/YL CMP SENSOR 5 VOLT SUPPLY
2 K44 20DB/GY CMP 1/1 SIGNAL
3 K944 20BK/GY CMP SENSOR GROUND
4 K853 20DB/BR CKP SENSOR 5 VOLT SUPPLY
5 K24 20BR/LB CKP SENSOR SIGNAL
6 K925 20DB/GY CKP SENSOR GROUND
7 G6 16VT/GY EOP SIGNAL (DPF)
7 G6 20DB/LG EOP SIGNAL (EXCEPT DPF)
8 F343 20DB/LG FUSED MAIN RELAY OUTPUT (EXCEPT DPF)
9 K601 20BR/VT EGR AIR FLOW CONTROL (EXCEPT DPF)
10 K834 20DB/LG EGR 5 VOLT SUPPLY (DPF)
10 K604 20BR/WT EGR AIR FLOW SIGNAL (EXCEPT DPF)
11 K934 20DB/WT EGR SENSOR GROUND (DPF)
11 Z909 20BK/WT GROUND (EXCEPT DPF)
12 K683 20DB/GY EGR SIGNAL (DPF)
13 K684 18DB/YL EGR CONTROL 2 (DPF)
14 K682 18DB/LB EGR CONTROL 1 (DPF)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.